While proudly owning an AutoRAE Lite calibration station is extremely helpful for making certain that any fuel detectors used inside your office are in good working situation and are acting at their optimum ranges, there could also be instances when the station itself wants just a little consideration. Use the next directions to assist troubleshoot your station Calibration Services:
Downside #1: It can not carry out a bump check or calibration; their related LEDs are darkish
There are literally quite a few causes that might have led this downside to develop, together with:
The fuel detector is within the unsuitable mode
The SD card has not been put in, has little or no house remaining, has been broken, or has been locked
To troubleshoot this downside and return your calibration station to its correct functioning, you need to test that the detector you’re calibrating or testing is in the precise mode. Whether it is, you need to flip your consideration to the SD card; chances are you’ll must clear house or use a brand new one.
Downside #2: All LEDs are darkish; the calibration station isn’t receiving energy
This downside will also be attributable to quite a few totally different causes, together with:
A unfastened or broken wire in AC adapter cable
A broken or faulty AC adapter
A disconnected or turned off AC adapter
Lifeless batteries
To troubleshoot this downside, you need to start by checking that the AC adapter has really been plugged into an influence supply. If that’s the case, you will want to totally examine the adapter for any harm (chances are you’ll want to exchange the adapter). If you’re operating the station on batteries, test that they’ve cost.
Downside #3: It can not carry out a bump check or calibration however the related LEDs are glowing usually
This can be a downside that might show to be just a little extra problematic and is attributable to quite a few causes:
An empty calibration fuel tank
An obstruction between the station and the fuel detector
A faulty gauge or obstruction within the inlet line
To troubleshoot this downside, you need to start by checking that the fuel tank you have got related to the calibration station is full, and that the fuel detector and the dock are clean. If this doesn’t repair the issue, swap to a brand new fuel tank and see what occurs. There could also be an inner challenge that wants consideration.
On the finish of the day, you will need to take into account that you’re utilizing a technological machine and that, typically, they break or develop points that you could rectify to make sure correct outcomes. In case your calibration station ever experiences these types of issues sooner or later, at the very least you can be effectively conscious of what you are able to do to repair it.